China wholesaler Semi-Trailer Outrigger Semi-Trailer Horse Leg Landing Gear with Great quality

Product Description

Product Description

ltem

Rated lifting load capacity (T/per pair)

Rated ultimate load capacity (T/per pair)

Maximum stroke (mm)

Low speed gear (mm/rev)    

High speed gear (mm/rev)

571.3480.01

16

28

480

0.86

6.54

0571 .3480.01

28

80

480

0.67

6

0571 .3480.02

28

80

480

0.72

5.42

0571 .3480.03

28

80

480

0.72

5.42

0571 .3480.04

28

50

480

1

10.6

1,Hot-rolled screw forming, high strength

2,Advanced alloy steel transmission gears

3,Dual reduction gear design, lightweight and convenient

4,Sliding shift, easy to operate

5,Connection dimensions conform to TTMA.AAR specifications

 

Trailer Landing Support Legs, also known as Trailer Landing Gear, are essential components of a trailer or RV that support the weight of the vehicle when it is parked or stationary. These legs are located at the front and rear of the trailer and are designed to stabilize the vehicle, preventing it from tipping or swaying while parked.

Trailer landing support legs typically consist of 2 telescoping tubes that are adjusted to the appropriate height and locked in place using pins or gears. Some models also come with a crank or motorized system to make adjusting the height of the legs easier.

Trailer landing support legs are available in a range of sizes and weight capacities to accommodate different types of trailers and RVs. Some models are designed specifically for fifth-wheel trailers, while others are more suitable for travel trailers or motorhomes.

In addition to providing stability, trailer landing support legs also make it easier to level the trailer on uneven ground. By adjusting the height of the legs, the trailer can be raised or lowered to ensure that it is level and secure.

Overall, Trailer Landing Support Legs are an essential component of any trailer or RV, providing stability, safety, and convenience for users.

 

Recommended Products

product-group/bqkGUWjCAPpV/Trailer-Parts-catalog-1.html

Company Profile

Nanou Company Co., Ltd. is a special trailer manufacturer located in Quanpu Industrial Park, Xihu (West Lake) Dis., ZheJiang Province.

The company is located in the famous Water Marginh hometown, east of ZheJiang -HangZhou Grand Canal, west of ZheJiang -Kowloon Railway, south of HangZhou, the hometown of peony, north of Yellow River, near the exit of National Highway 220 Jinhe Expressway, with convenient transportation and pleasant scenery.

We are the full-size Modified Truck enterprise which integrates the design of product, scientific research developing, production and sale together, possessing subsidiary companies of automobile production, automobile trade and automobile fittings production, etc. Our leading products include “Nanou” brand semi-trailers, tipper, fuel tanker, particle material tanker, bulk cement tanker, concrete mixer truck, wrecker trucks, LNG, CNG, and other special vehicles.

We strictly adhere to the service idea of customer centricity and customer satisfaction, so as to provide customers with better and faster honest service.

Over the years, we have always adhered to the business strategy of “innovation, development” and the concept of “quality is the life of the enterprise, talent is the foundation of the enterprise, customer is the god of the enterprise, management is the soul of the enterprise”.

Now, Nanou trailers are widely exported to most Africa market (such as Algeria, Zimbabwe, Ethiopia, Kenya, Nigeria, Sudan, Malawi, Tanzania, Cameroon, Ghana, Qatar)and Dubai, Saudi Arabia, Iran, Malaysia, Philippines, Vietnam, Pakistan, Russia, and Central& South America market.

If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.

We are looking CZPT to forming successful business relationships with new clients around the world in the near future.

Packaging & Shipping

FAQ

A. What are our advantages compared with other manufacturers

  • Competive Price – We work as the leading dealers of various leading China Semi Trailers manufacturers/factories.From numerous comparison and feedback from clients, our price is more competitive than manufacturers/factories.
  • Quick Response – Our team is consisted of a group of diligent and enterprising people, working 24/7 to respond client inquiries and questions all the time. Most problems can be solved within 12 hours.
  • Fast Delivery – Normally it will take more than 25-45 days for manufacturers/ factories to produce the ordered trailers, while we have a variety of resources, locally and nation widely, to receive trailers in timely manner. In 80% circumstance, we can have a 15-20 days delivery of regular trailers for our clients.
  • High Quality – Every process of choose material ,welding ,sand blasting,painting with detailed inspection,accept 100% inspection during production and after production.

B. Which payment terms can we accept?

  • Normally we can work on T/T term or L/C term.
  • On T/T term, 30% down payment is required in advance, 70% balance shall be settled before delivery, or against the copy of original B/L for regular client.
  • On L/C term, normally need 30% down payment by T/T, 70% by L/C at sight. a 100% irrevocable L/C without “soft clauses” can be accepted sometimes. Please seek the advice from the individual sales manager whom you work with.

C. How long will our price be valid?

  • Price with long valid time — We are a tender and friendly supplier, never greedy on windfall profit. Basically, our price remains stable through the year. We only adjust our price based on 2 situations: The rate of USD:RMB varies significantly according to the international currency exchange rates. Manufacturers/factories adjusted the trailer price, because of the increasing labor cost and raw material cost.

D. What logistics ways we can work for shipment?

  • We can ship all trailer by various transportation tools.
  • For 90% of our shipment, we will go by sea, to all main continents such as South America, Middle East, Africa, Oceania etc, either by container or RoRo/Bulk Shipment.
  • For neighborhood countries of China, such as Russia, Tajikistan, Kazakhstan,Mongolia etc, we can ship trucks by road or railway.
  • For light spare parts in urgent demand, we can ship it by international courier service, such as DHL, TNT, UPS, or Fedex.

After-sales Service: 24h Online
Warranty: 1~2 Years
Type: Jack
Certification: ISO/TS16949, CCC, DOT, ISO, CE
Loading Weight: 10t-30t
ABS: Without ABS
Samples:
US$ 120/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

Gear

Synthesis of Epicyclic Gear Trains for Automotive Automatic Transmissions

In this article, we will discuss the synthesis of epicyclic gear trains for automotive automatic transmissions, their applications, and cost. After you have finished reading, you may want to do some research on the technology yourself. Here are some links to further reading on this topic. They also include an application in hybrid vehicle transmissions. Let’s look at the basic concepts of epicyclic gear trains. They are highly efficient and are a promising alternative to conventional gearing systems.

Synthesis of epicyclic gear trains for automotive automatic transmissions

The main purpose of automotive automatic transmissions is to maintain engine-drive wheel balance. The kinematic structure of epicyclic gear trains (EGTs) is derived from graph representations of these gear trains. The synthesis process is based on an algorithm that generates admissible epicyclic gear trains with up to ten links. This algorithm enables designers to design auto gear trains that have higher performance and better engine-drive wheel balance.
In this paper, we present a MATLAB optimization technique for determining the gear ratios of epicyclic transmission mechanisms. We also enumerate the number of teeth for all gears. Then, we estimate the overall velocity ratios of the obtained EGTs. Then, we analyze the feasibility of the proposed epicyclic gear trains for automotive automatic transmissions by comparing their structural characteristics.
A six-link epicyclic gear train is depicted in the following functional diagram. Each link is represented by a double-bicolor graph. The numbers on the graph represent the corresponding links. Each link has multiple joints. This makes it possible for a user to generate different configurations for each EGT. The numbers on the different graphs have different meanings, and the same applies to the double-bicolor figure.
In the next chapter of this article, we discuss the synthesis of epicyclic gear trains for automotive automatic transaxles. SAE International is an international organization of engineers and technical experts with core competencies in aerospace and automotive. Its charitable arm, the SAE Foundation, supports many programs and initiatives. These include the Collegiate Design Series and A World In Motion(r) and the SAE Foundation’s A World in Motion(r) award.
Gear

Applications

The epicyclic gear system is a type of planetary gear train. It can achieve a great speed reduction in a small space. In cars, epicyclic gear trains are often used for the automatic transmission. These gear trains are also useful in hoists and pulley blocks. They have many applications in both mechanical and electrical engineering. They can be used for high-speed transmission and require less space than other types of gear trains.
The advantages of an epicyclic gear train include its compact structure, low weight, and high power density. However, they are not without disadvantages. Gear losses in epicyclic gear trains are a result of friction between gear tooth surfaces, churning of lubricating oil, and the friction between shaft support bearings and sprockets. This loss of power is called latent power, and previous research has demonstrated that this loss is tremendous.
The epicyclic gear train is commonly used for high-speed transmissions, but it also has a small footprint and is suitable for a variety of applications. It is used as differential gears in speed frames, to drive bobbins, and for the Roper positive let-off in looms. In addition, it is easy to fabricate, making it an excellent choice for a variety of industrial settings.
Another example of an epicyclic gear train is the planetary gear train. It consists of two gears with a ring in the middle and the sun gear in the outer ring. Each gear is mounted so that its center rotates around the ring of the other gear. The planet gear and sun gear are designed so that their pitch circles do not slip and are in sync. The planet gear has a point on the pitch circle that traces the epicycloid curve.
This gear system also offers a lower MTTR than other types of planetary gears. The main disadvantage of these gear sets is the large number of bearings they need to run. Moreover, planetary gears are more maintenance-intensive than parallel shaft gears. This makes them more difficult to monitor and repair. The MTTR is also lower compared to parallel shaft gears. They can also be a little off on their axis, causing them to misalign or lose their efficiency.
Another example of an epicyclic gear train is the differential gear box of an automobile. These gears are used in wrist watches, lathe machines, and automotives to transmit power. In addition, they are used in many other applications, including in aircrafts. They are quiet and durable, making them an excellent choice for many applications. They are used in transmission, textile machines, and even aerospace. A pitch point is the path between two teeth in a gear set. The axial pitch of one gear can be increased by increasing its base circle.
An epicyclic gear is also known as an involute gear. The number of teeth in each gear determines its rate of rotation. A 24-tooth sun gear produces an N-tooth planet gear with a ratio of 3/2. A 24-tooth sun gear equals a -3/2 planet gear ratio. Consequently, the epicyclic gear system provides high torque for driving wheels. However, this gear train is not widely used in vehicles.
Gear

Cost

The cost of epicyclic gearing is lower when they are tooled rather than manufactured on a normal N/C milling machine. The epicyclic carriers should be manufactured in a casting and tooled using a single-purpose machine that has multiple cutters to cut the material simultaneously. This approach is widely used for industrial applications and is particularly useful in the automotive sector. The benefits of a well-made epicyclic gear transmission are numerous.
An example of this is the planetary arrangement where the planets orbit the sun while rotating on its shaft. The resulting speed of each gear depends on the number of teeth and the speed of the carrier. Epicyclic gears can be tricky to calculate relative speeds, as they must figure out the relative speed of the sun and the planet. The fixed sun is not at zero RPM at mesh, so the relative speed must be calculated.
In order to determine the mesh power transmission, epicyclic gears must be designed to be able to “float.” If the tangential load is too low, there will be less load sharing. An epicyclic gear must be able to allow “float.” It should also allow for some tangential load and pitch-line velocities. The higher these factors, the more efficient the gear set will be.
An epicyclic gear train consists of two or more spur gears placed circumferentially. These gears are arranged so that the planet gear rolls inside the pitch circle of the fixed outer gear ring. This curve is called a hypocycloid. An epicyclic gear train with a planet engaging a sun gear is called a planetary gear train. The sun gear is fixed, while the planet gear is driven.
An epicyclic gear train contains several meshes. Each gear has a different number of meshes, which translates into RPM. The epicyclic gear can increase the load application frequency by translating input torque into the meshes. The epicyclic gear train consists of 3 gears, the sun, planet, and ring. The sun gear is the center gear, while the planets orbit the sun. The ring gear has several teeth, which increases the gear speed.
Another type of epicyclic gear is the planetary gearbox. This gear box has multiple toothed wheels rotating around a central shaft. Its low-profile design makes it a popular choice for space-constrained applications. This gearbox type is used in automatic transmissions. In addition, it is used for many industrial uses involving electric gear motors. The type of gearbox you use will depend on the speed and torque of the input and output shafts.

China wholesaler Semi-Trailer Outrigger Semi-Trailer Horse Leg Landing Gear with Great qualityChina wholesaler Semi-Trailer Outrigger Semi-Trailer Horse Leg Landing Gear with Great quality
editor by CX 2023-05-31