China 3mx14z Custom Forged High Strength Gear raw gear

Product Description

modulus Series I .1 .1 .2 .2 .three .three .4 1 .6 1 1 1.3 two 2
2.5 3 4 5 six eight 10 twelve 16 twenty 25 32 forty fifty
Series two .four .seven .nine 1.eight two.3 2.8 3.3 4 three.eight 5 6 6.five 7 9
eleven fourteen eighteen 22 28 36 forty five First series favored

 

lationship among modulus and diametral pitch   DP:Diametral pitch               m:modulus

 

Main parameter Diameter High Excess weight /Kg Inner hole specification Material
48 34 .23 Ø18 20CrMnTi
Modulo three Quantity of tooth fourteen Hardness HRC58-sixty two

 

Unthreaded gap
Substantial precision interior gap
Free rotation without having obstruction

twenty ° strain angle

 

Broad software scope and strong universality

 

Forging blank
Higher density, higher strength, content preserving

 

 

 

Tooth side machining fillet

Convenient shifting

 

1 Q: Notice prior to obtain
A: The parameters in the merchandise information are reference values, which may possibly be diverse from the actual size. Ahead of producing an get, be sure to affirm the measurement you want with our buyer support. All rubber areas, CZPT and other vulnerable areas are not covered by the San Bao warranty.
2 Q: Questions about return and replacement
A: As the items are tailored items, all goods must be sampled prior to batch ordering to decide the size info and efficiency information. We will not settle for any ask for for return or alternative of items that are directly custom-made in batches with no passing the sample verification of appropriate efficiency. You should fully communicate with us just before buying the samples. Once the samples are marketed, they will not be returned or replaced.
3 Q: Payment technique
A: 50% of the total payment for items shall be paid out at the time of ordering, and the agreement shall be considered to be efficient soon after the payment is received The balance payment shall be paid out after the goods are produced and packaged, and the goods shall be delivered following the balance payment is received.
4 Q: Who bears the transportation and packaging costs?
A: According to the theory of proximity, we will pay the transportation and packaging costs from the firm to the site (intercontinental convey) or port, and the afterwards charges right after the merchandise get there at the site or port will be borne by the buyer.
5 Q: How extended is the shipping time?
A: Due to solution attributes, apart from for a couple of merchandise with a tiny amount of stock, the manufacturing of other merchandise commences after the order contract normally takes influence. Therefore, the supply cycle ought to be determined according to the buy.
6 Q: How to ensure the safety of cargo transportation?
A: Before the product leaves the manufacturing facility, the most suited packaging technique amid carton, wood case, tray, iron basket, iron box and container will be picked according to the traits of the merchandise. At the identical time, adhesive tape, packing belt, steel belt, adhesive tray movie, foam board, bubble movie and other packing materials will be utilized to seal, repair and cushion the filling materials, so as to make sure the security of the items for the duration of transportation as much as attainable.


/ Piece
|
500 Pieces

(Min. Order)

###

Application: Agricultural Machinery
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Carburizing Steel-20crmnti

###

Samples:
US$ 4.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

modulus Series I 0.1 0.1 0.2 0.2 0.3 0.3 0.4 1 0.6 1 1 1.3 2 2
2.5 3 4 5 6 8 10 12 16 20 25 32 40 50
Series 2 0.4 0.7 0.9 1.8 2.3 2.8 3.3 4 3.8 5 6 6.5 7 9
11 14 18 22 28 36 45 First series preferred

###

lationship between modulus and diametral pitch  3mx14z Custom Forged High Strength Gear DP:Diametral pitch               m:modulus

###

Main parameter Diameter High Weight /Kg Inner hole specification Material
48 34 0.23 Ø18 20CrMnTi
Modulo 3 Number of teeth 14 Hardness HRC58-62

###

1 Q: Notice before purchase
A: The parameters in the product details are reference values, which may be different from the actual size. Before making an order, be sure to confirm the size you need with our customer service. All rubber parts, plastic parts and other vulnerable parts are not covered by the San Bao warranty.
2 Q: Questions about return and replacement
A: As the goods are customized products, all products must be sampled before batch ordering to determine the size data and performance data. We will not accept any request for return or replacement of products that are directly customized in batches without passing the sample verification of relevant performance. Please fully communicate with us before ordering the samples. Once the samples are sold, they will not be returned or replaced.
3 Q: Payment method
A: 50% of the total payment for goods shall be paid at the time of ordering, and the contract shall be deemed to be effective after the payment is received; The balance payment shall be paid after the goods are produced and packaged, and the goods shall be delivered after the balance payment is received.
4 Q: Who bears the transportation and packaging costs?
A: According to the principle of proximity, we will pay the transportation and packaging costs from the company to the site (international express) or port, and the later costs after the goods arrive at the site or port will be borne by the buyer.
5 Q: How long is the delivery time?
A: Due to product characteristics, except for a few products with a small amount of inventory, the production of other products starts after the order contract takes effect. Therefore, the supply cycle should be determined according to the order.
6 Q: How to ensure the safety of cargo transportation?
A: Before the product leaves the factory, the most suitable packaging method among carton, wooden case, tray, iron basket, iron box and container will be selected according to the characteristics of the product. At the same time, adhesive tape, packing belt, steel belt, adhesive tray film, foam board, bubble film and other packing materials will be used to seal, fix and cushion the filling materials, so as to ensure the safety of the goods during transportation as far as possible.

/ Piece
|
500 Pieces

(Min. Order)

###

Application: Agricultural Machinery
Hardness: Hardened Tooth Surface
Gear Position: Internal Gear
Manufacturing Method: Cut Gear
Toothed Portion Shape: Spur Gear
Material: Carburizing Steel-20crmnti

###

Samples:
US$ 4.5/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

modulus Series I 0.1 0.1 0.2 0.2 0.3 0.3 0.4 1 0.6 1 1 1.3 2 2
2.5 3 4 5 6 8 10 12 16 20 25 32 40 50
Series 2 0.4 0.7 0.9 1.8 2.3 2.8 3.3 4 3.8 5 6 6.5 7 9
11 14 18 22 28 36 45 First series preferred

###

lationship between modulus and diametral pitch  3mx14z Custom Forged High Strength Gear DP:Diametral pitch               m:modulus

###

Main parameter Diameter High Weight /Kg Inner hole specification Material
48 34 0.23 Ø18 20CrMnTi
Modulo 3 Number of teeth 14 Hardness HRC58-62

###

1 Q: Notice before purchase
A: The parameters in the product details are reference values, which may be different from the actual size. Before making an order, be sure to confirm the size you need with our customer service. All rubber parts, plastic parts and other vulnerable parts are not covered by the San Bao warranty.
2 Q: Questions about return and replacement
A: As the goods are customized products, all products must be sampled before batch ordering to determine the size data and performance data. We will not accept any request for return or replacement of products that are directly customized in batches without passing the sample verification of relevant performance. Please fully communicate with us before ordering the samples. Once the samples are sold, they will not be returned or replaced.
3 Q: Payment method
A: 50% of the total payment for goods shall be paid at the time of ordering, and the contract shall be deemed to be effective after the payment is received; The balance payment shall be paid after the goods are produced and packaged, and the goods shall be delivered after the balance payment is received.
4 Q: Who bears the transportation and packaging costs?
A: According to the principle of proximity, we will pay the transportation and packaging costs from the company to the site (international express) or port, and the later costs after the goods arrive at the site or port will be borne by the buyer.
5 Q: How long is the delivery time?
A: Due to product characteristics, except for a few products with a small amount of inventory, the production of other products starts after the order contract takes effect. Therefore, the supply cycle should be determined according to the order.
6 Q: How to ensure the safety of cargo transportation?
A: Before the product leaves the factory, the most suitable packaging method among carton, wooden case, tray, iron basket, iron box and container will be selected according to the characteristics of the product. At the same time, adhesive tape, packing belt, steel belt, adhesive tray film, foam board, bubble film and other packing materials will be used to seal, fix and cushion the filling materials, so as to ensure the safety of the goods during transportation as far as possible.

Hypoid Bevel Vs Straight Spiral Bevel – What’s the Difference?

Spiral gears come in many different varieties, but there is a fundamental difference between a Hypoid bevel gear and a Straight spiral bevel. This article will describe the differences between the two types of gears and discuss their use. Whether the gears are used in industrial applications or at home, it is vital to understand what each type does and why it is important. Ultimately, your final product will depend on these differences.
Gear

Hypoid bevel gears

In automotive use, hypoid bevel gears are used in the differential, which allows the wheels to rotate at different speeds while maintaining the vehicle’s handling. This gearbox assembly consists of a ring gear and pinion mounted on a carrier with other bevel gears. These gears are also widely used in heavy equipment, auxiliary units, and the aviation industry. Listed below are some common applications of hypoid bevel gears.
For automotive applications, hypoid gears are commonly used in rear axles, especially on large trucks. Their distinctive shape allows the driveshaft to be located deeper in the vehicle, thus lowering the center of gravity and minimizing interior disruption. This design makes the hypoid gearset one of the most efficient types of gearboxes on the market. In addition to their superior efficiency, hypoid gears are very easy to maintain, as their mesh is based on sliding action.
The face-hobbed hypoid gears have a characteristic epicycloidal lead curve along their lengthwise axis. The most common grinding method for hypoid gears is the Semi-Completing process, which uses a cup-shaped grinding wheel to replace the lead curve with a circular arc. However, this method has a significant drawback – it produces non-uniform stock removal. Furthermore, the grinding wheel cannot finish all the surface of the tooth.
The advantages of a hypoid gear over a spiral bevel gear include a higher contact ratio and a higher transmission torque. These gears are primarily used in automobile drive systems, where the ratio of a single pair of hypoid gears is the highest. The hypoid gear can be heat-treated to increase durability and reduce friction, making it an ideal choice for applications where speed and efficiency are critical.
The same technique used in spiral bevel gears can also be used for hypoid bevel gears. This machining technique involves two-cut roughing followed by one-cut finishing. The pitch diameter of hypoid gears is up to 2500 mm. It is possible to combine the roughing and finishing operations using the same cutter, but the two-cut machining process is recommended for hypoid gears.
The advantages of hypoid gearing over spiral bevel gears are primarily based on precision. Using a hypoid gear with only three arc minutes of backlash is more efficient than a spiral bevel gear that requires six arc minutes of backlash. This makes hypoid gears a more viable choice in the motion control market. However, some people may argue that hypoid gears are not practical for automobile assemblies.
Hypoid gears have a unique shape – a cone that has teeth that are not parallel. Their pitch surface consists of two surfaces – a conical surface and a line-contacting surface of revolution. An inscribed cone is a common substitute for the line-contact surface of hypoid bevel gears, and it features point-contacts instead of lines. Developed in the early 1920s, hypoid bevel gears are still used in heavy truck drive trains. As they grow in popularity, they are also seeing increasing use in the industrial power transmission and motion control industries.
Gear

Straight spiral bevel gears

There are many differences between spiral bevel gears and the traditional, non-spiral types. Spiral bevel gears are always crowned and never conjugated, which limits the distribution of contact stress. The helical shape of the bevel gear is also a factor of design, as is its length. The helical shape has a large number of advantages, however. Listed below are a few of them.
Spiral bevel gears are generally available in pitches ranging from 1.5 to 2500 mm. They are highly efficient and are also available in a wide range of tooth and module combinations. Spiral bevel gears are extremely accurate and durable, and have low helix angles. These properties make them excellent for precision applications. However, some gears are not suitable for all applications. Therefore, you should consider the type of bevel gear you need before purchasing.
Compared to helical gears, straight bevel gears are easier to manufacture. The earliest method used to manufacture these gears was the use of a planer with an indexing head. However, with the development of modern manufacturing processes such as the Revacycle and Coniflex systems, manufacturers have been able to produce these gears more efficiently. Some of these gears are used in windup alarm clocks, washing machines, and screwdrivers. However, they are particularly noisy and are not suitable for automobile use.
A straight bevel gear is the most common type of bevel gear, while a spiral bevel gear has concave teeth. This curved design produces a greater amount of torque and axial thrust than a straight bevel gear. Straight teeth can increase the risk of breaking and overheating equipment and are more prone to breakage. Spiral bevel gears are also more durable and last longer than helical gears.
Spiral and hypoid bevel gears are used for applications with high peripheral speeds and require very low friction. They are recommended for applications where noise levels are essential. Hypoid gears are suitable for applications where they can transmit high torque, although the helical-spiral design is less effective for braking. For this reason, spiral bevel gears and hypoids are generally more expensive. If you are planning to buy a new gear, it is important to know which one will be suitable for the application.
Spiral bevel gears are more expensive than standard bevel gears, and their design is more complex than that of the spiral bevel gear. However, they have the advantage of being simpler to manufacture and are less likely to produce excessive noise and vibration. They also have less teeth to grind, which means that they are not as noisy as the spiral bevel gears. The main benefit of this design is their simplicity, as they can be produced in pairs, which saves money and time.
In most applications, spiral bevel gears have advantages over their straight counterparts. They provide more evenly distributed tooth loads and carry more load without surface fatigue. The spiral angle of the teeth also affects thrust loading. It is possible to make a straight spiral bevel gear with two helical axes, but the difference is the amount of thrust that is applied to each individual tooth. In addition to being stronger, the spiral angle provides the same efficiency as the straight spiral gear.
Gear

Hypoid gears

The primary application of hypoid gearboxes is in the automotive industry. They are typically found on the rear axles of passenger cars. The name is derived from the left-hand spiral angle of the pinion and the right-hand spiral angle of the crown. Hypoid gears also benefit from an offset center of gravity, which reduces the interior space of cars. Hypoid gears are also used in heavy trucks and buses, where they can improve fuel efficiency.
The hypoid and spiral bevel gears can be produced by face-hobbing, a process that produces highly accurate and smooth-surfaced parts. This process enables precise flank surfaces and pre-designed ease-off topographies. These processes also enhance the mechanical resistance of the gears by 15 to 20%. Additionally, they can reduce noise and improve mechanical efficiency. In commercial applications, hypoid gears are ideal for ensuring quiet operation.
Conjugated design enables the production of hypoid gearsets with length or profile crowning. Its characteristic makes the gearset insensitive to inaccuracies in the gear housing and load deflections. In addition, crowning allows the manufacturer to adjust the operating displacements to achieve the desired results. These advantages make hypoid gear sets a desirable option for many industries. So, what are the advantages of hypoid gears in spiral gears?
The design of a hypoid gear is similar to that of a conventional bevel gear. Its pitch surfaces are hyperbolic, rather than conical, and the teeth are helical. This configuration also allows the pinion to be larger than an equivalent bevel pinion. The overall design of the hypoid gear allows for large diameter shafts and a large pinion. It can be considered a cross between a bevel gear and a worm drive.
In passenger vehicles, hypoid gears are almost universal. Their smoother operation, increased pinion strength, and reduced weight make them a desirable choice for many vehicle applications. And, a lower vehicle body also lowers the vehicle’s body. These advantages made all major car manufacturers convert to hypoid drive axles. It is worth noting that they are less efficient than their bevel gear counterparts.
The most basic design characteristic of a hypoid gear is that it carries out line contact in the entire area of engagement. In other words, if a pinion and a ring gear rotate with an angular increment, line contact is maintained throughout their entire engagement area. The resulting transmission ratio is equal to the angular increments of the pinion and ring gear. Therefore, hypoid gears are also known as helical gears.

China 3mx14z Custom Forged High Strength Gear     raw gearChina 3mx14z Custom Forged High Strength Gear     raw gear
editor by CX 2023-03-27